The Advantages of the Vital Injector Compared to Manual Injection

The Vital injector offers several benefits over manual injection, as follows:

· Higher Precision: The Vital injector is a computer - controlled advanced injection device. It can precisely adjust the injection depth, usually ranging from 0.1 to 4.0mm or 0.5 to 2mm, and the dose, typically from 0.01 to 0.2mL or 0.01 to 0.1mL. In contrast, it is difficult for inexperienced doctors to accurately control the injection depth and the dose at each injection point during manual injection.

· Greater Efficiency: The Vital injector often adopts a multi - needle design, such as a 5 - needle design. It can complete the injection process faster than traditional manual injection, shortening the treatment time and improving work efficiency.

· More Uniform Injection Effect: Since the Vital injector can precisely control the injection dose of each needle, and multiple needles are injected synchronously, it is easier to obtain a uniform injection effect, ensuring that the nutrient solution is evenly distributed in the skin.

· Reduced Risk of Cross - Infection: The Vital injector usually uses disposable needles, which can avoid the risk of cross - infection, while the needles used in manual injection need to be strictly disinfected, and there may be some risks if the disinfection is not thorough.

· Less Trauma and Faster Recovery: The tiny injection needles of the Vital injector minimize pain and discomfort. The resulting micro - traumas are also smaller, and the recovery time after treatment is short. Usually, the effect can be seen within a few days, which is more conducive to the patient's rapid return to normal life.

· Enhanced Nutrient Absorption: Some Vital injectors use vacuum negative pressure technology, which can enhance the permeability of nutrient solutions, effectively introduce nutrients into the deep skin, and play a better role in hydrating and repairing the skin, while the absorption efficiency of nutrients in manual injection is relatively low.

The Vital injector operates on the following principles:

· Negative - pressure Technology: It utilizes acoustic - controlled negative - pressure technology. Before the micro - needles enter the skin, the acoustic press lifts the skin slightly, keeping it tight. This enables the needles to reach the precise depth, usually 1.28mm in the dermis, and then multiple needles are used to inject nutrients such as hyaluronic acid and collagen. The negative - pressure technology ensures that the injected substances do not leak, reducing the loss of nutrients.

· Precise Injection Control: The device is equipped with an intelligent operating system. It can accurately control and adjust the injection dose. The injection volume can be adjusted by simply pressing buttons on the OLED screen at the back of the device. Additionally, it can precisely regulate the needle insertion depth, with the micro - needles entering the skin at a depth of 1 - 3mm, adjustable in 0.1mm increments, ensuring uniform injection of nutrients.

· Multi - needle Injection: It adopts a multi - needle design, which can complete the injection process faster than traditional single - needle manual injection, improving treatment efficiency. For example, it can generally finish injecting a face in about 15 minutes. The multi - needle injection can also evenly distribute nutrients in the skin, achieving a more uniform treatment effect.

· Nutrient Introduction: It uses fine needles to directly inject nutrients such as hyaluronic acid, vitamins, and antioxidants into the dermis of the skin. These nutrients can help with deep - layer hydration, promote collagen production, and improve skin texture and elasticity.